Computational methods and efficiency

Brian has several different methods for running the computations in a simulation. The default mode is Runtime code generation, which runs the simulation loop in Python but compiles and executes the modules doing the actual simulation work (numerical integration, synaptic propagation, etc.) in a defined target language. Brian will select the best available target language automatically. On Windows, to ensure that you get the advantages of compiled code, read the instructions on installing a suitable compiler in Windows. Runtime mode has the advantage that you can combine the computations performed by Brian with arbitrary Python code specified as NetworkOperation.

The fact that the simulation is run in Python means that there is a (potentially big) overhead for each simulated time step. An alternative is to run Brian in with Standalone code generation – this is in general faster (for certain types of simulations much faster) but cannot be used for all kinds of simulations. To enable this mode, add the following line after your Brian import, but before your simulation code:

set_device('cpp_standalone')

For detailed control over the compilation process (both for runtime and standalone code generation), you can change the Cleaning up after a run that are used.

The following topics are not essential for beginners.


Runtime code generation

Code generation means that Brian takes the Python code and strings in your model and generates code in one of several possible different languages which is then executed. The target language for this code generation process is set in the codegen.target preference. By default, this preference is set to 'auto', meaning that it will choose the compiled language target if possible and fall back to Python otherwise (also raising a warning). The compiled language target is 'cython' which needs the Cython package in addition to a working C++ compiler. If you want to chose a code generation target explicitly (e.g. because you want to get rid of the warning that only the Python fallback is available), set the preference to 'numpy' or 'cython' at the beginning of your script:

from brian2 import *
prefs.codegen.target = 'numpy'  # use the Python fallback

See Preferences for different ways of setting preferences.

Caching

When you run code with cython for the first time, it will take some time to compile the code. For short simulations, this can make these targets to appear slow compared to the numpy target where such compilation is not necessary. However, the compiled code is stored on disk and will be re-used for later runs, making these simulations start faster. If you run many simulations with different code (e.g. Brian’s test suite), this code can take quite a bit of space on the disk. During the import of the brian2 package, we check whether the size of the disk cache exceeds the value set by the codegen.max_cache_dir_size preference (by default, 1GB) and display a message if this is the case. You can clear the disk cache manually, or use the clear_cache function, e.g. clear_cache('cython').

Note

If you run simulations on parallel on a machine using the Network File System, see this known issue.

Standalone code generation

Brian supports generating standalone code for multiple devices. In this mode, running a Brian script generates source code in a project tree for the target device/language. This code can then be compiled and run on the device, and modified if needed. At the moment, the only “device” supported is standalone C++ code. In some cases, the speed gains can be impressive, in particular for smaller networks with complicated spike propagation rules (such as STDP).

To use the C++ standalone mode, you only have to make very small changes to your script. The exact change depends on whether your script has only a single run() (or Network.run) call, or several of them:

Single run call

At the beginning of the script, i.e. after the import statements, add:

set_device('cpp_standalone')

The CPPStandaloneDevice.build function will be automatically called with default arguments right after the run() call. If you need non-standard arguments then you can specify them as part of the set_device() call:

set_device('cpp_standalone', directory='my_directory', debug=True)

Multiple run calls

At the beginning of the script, i.e. after the import statements, add:

set_device('cpp_standalone', build_on_run=False)

After the last run() call, call device.build() explicitly:

device.build(directory='output', compile=True, run=True, debug=False)

The build function has several arguments to specify the output directory, whether or not to compile and run the project after creating it and whether or not to compile it with debugging support or not.

Multiple builds

To run multiple full simulations (i.e. multiple device.build calls, not just multiple run() calls as discussed above), you have to reinitialize the device again:

device.reinit()
device.activate()

Note that the device “forgets” about all previously set build options provided to set_device() (most importantly the build_on_run option, but also e.g. the directory), you’ll have to specify them as part of the Device.activate call. Also, Device.activate will reset the defaultclock, you’ll therefore have to set its dt after the activate call if you want to use a non-default value.

Limitations

Not all features of Brian will work with C++ standalone, in particular Python based network operations and some array based syntax such as S.w[0, :] = ... will not work. If possible, rewrite these using string based syntax and they should work. Also note that since the Python code actually runs as normal, code that does something like this may not behave as you would like:

results = []
for val in vals:
    # set up a network
    run()
    results.append(result)

The current C++ standalone code generation only works for a fixed number of run statements, not with loops. If you need to do loops or other features not supported automatically, you can do so by inspecting the generated C++ source code and modifying it, or by inserting code directly into the main loop as follows:

device.insert_code('main', '''
cout << "Testing direct insertion of code." << endl;
''')

Variables

After a simulation has been run (after the run() call if set_device() has been called with build_on_run set to True or after the Device.build call with run set to True), state variables and monitored variables can be accessed using standard syntax, with a few exceptions (e.g. string expressions for indexing).

Multi-threading with OpenMP

Warning

OpenMP code has not yet been well tested and so may be inaccurate.

When using the C++ standalone mode, you have the opportunity to turn on multi-threading, if your C++ compiler is compatible with OpenMP. By default, this option is turned off and only one thread is used. However, by changing the preferences of the codegen.cpp_standalone object, you can turn it on. To do so, just add the following line in your python script:

prefs.devices.cpp_standalone.openmp_threads = XX

XX should be a positive value representing the number of threads that will be used during the simulation. Note that the speedup will strongly depend on the network, so there is no guarantee that the speedup will be linear as a function of the number of threads. However, this is working fine for networks with not too small timestep (dt > 0.1ms), and results do not depend on the number of threads used in the simulation.

Customizing the build process

In standalone mode, a standard “make file” is used to orchestrate the compilation and linking. To provide additional arguments to the make command (respectively nmake on Windows), you can use the devices.cpp_standalone.extra_make_args_unix or devices.cpp_standalone.extra_make_args_windows preference. On Linux, this preference is by default set to ['-j'] to enable parallel compilation. Note that you can also use these arguments to overwrite variables in the make file, e.g. to use clang instead of the default gcc compiler:

prefs.devices.cpp_standalone.extra_make_args_unix += ['CC=clang++']

Cleaning up after a run

Standalone simulations store all results of a simulation (final state variable values and values stored in monitors) to disk. These results can take up quite significant amount of space, and you might therefore want to delete these results when you do not need them anymore. You can do this by using the device’s delete method:

device.delete()

Be aware that deleting the data will make all access to state variables fail, including the access to values in monitors. You should therefore only delete the data after doing all analysis/plotting that you are interested in.

By default, this function will delete both the generated code and the data, i.e. the full project directory. If you want to keep the code (which typically takes up little space compared to the results), exclude it from the deletion:

device.delete(code=False)

If you added any additional files to the project directory manually, these will not be deleted by default. To delete the full directory regardless of its content, use the force option:

device.delete(force=True)

Note

When you initialize state variables with concrete values (and not with a string expression), they will be stored to disk from your Python script and loaded from disk at the beginning of the standalone run. Since these values are necessary for the compiled binary file to run, they are considered “code” from the point of view of the delete function.

Compiler settings

If using C++ code generation (either via cython or standalone), the compiler settings can make a big difference for the speed of the simulation. By default, Brian uses a set of compiler settings that switches on various optimizations and compiles for running on the same architecture where the code is compiled. This allows the compiler to make use of as many advanced instructions as possible, but reduces portability of the generated executable (which is not usually an issue).

If there are any issues with these compiler settings, for example because you are using an older version of the C++ compiler or because you want to run the generated code on a different architecture, you can change the settings by manually specifying the codegen.cpp.extra_compile_args preference (or by using codegen.cpp.extra_compile_args_gcc or codegen.cpp.extra_compile_args_msvc if you want to specify the settings for either compiler only).